72" Lazer Z Diesel Zero Turn Mowers

Model LZS80TDYM724W0

Manufacturer Exmark

When maximum productivity, durability, and cut quality are your priorities, the new Exmark Lazer Z Diesel zero-turn mowers are the right choice. When equipped with the new industry-leading 144-inch UltraCut™ Flex Wing cutting deck, the Lazer Z Diesel can mow 11.5 acres per hour, making it the most productive mower Exmark has built. Powered by a cutting-edge Yanmar diesel engine, large drive tires allow you to reach ground speeds up to 12.5 MPH with the 96" deck. The Lazer Z Diesel is also available with 60 and 72-inch UltraCut™ cutting decks. Delivering a high-quality cut, the flex wings on the 96-inch and 144-inch decks pivot 20-degrees up and 15-degrees down on sloping terrain.

Features

Specifications For Model # LZS80TDYM724W0

Equipment

• Blade Spindles No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft, double row bearings top and bottom, and splined blade driver.
• Drive Tires 26x12-12, 6ply
• Front Caster Tires 15 x 6.0-6, smooth-tread, semi-pneumatic.
• Caster Forks .50" thick caster yoke arms.
• Tractor Frame Welded, heavy-duty 1.5" x 3" x 3/16" tubular steel.
• Steering Control Hydraulically dampened twin levers, adjust fore and aft., also adjustable to 2 height positions. Adjustable dampeners (3 positions) to customize drive responsiveness.
• Parking Brake Lever-actuated internal wet disc brake.
• Seat Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
• Electrical 12-volt battery with 55-amp alternator.
• Onboard Intelligence RED Technology
• Standard Features 12-volt plug-in, engine hour meter and cup holder
• UPC 193308000787

Power Components

• Engine Brand Yanmar
• Engine Model 3TNV80FT
• Engine Displacement 1267
• Engine Series TNV
• Fuel System Electronically Governed IDI Turbo Diesel
• Engine Speed 2,600 RPM
• Air Filter Heavy-duty canister air filtration system with electronic vacuum sensor
• Fuel Type Diesel
• Fuel Capacity 12-gallon (45.4-L), side fuel tanks
• Fuel Indicator Yes - mechanical float type
• Drive Hydro-Drive
• Drive Description Kanzaki KPS-18T Transmission, 16-quart oil capacity, spin-on filter. 18 cc shoe type pumps and 17.84 cubic inch Hydro-Gear HGM-18 motors, hydraulic oil cooler.
• Speed Infinitely variable speed selection from 0–11.0 mph (18 kmph) forward, 0–6 mph (10 kmph) reverse.
• Carb Compliant Yes
• Deck Lift Hydraulic
• Safety Package Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
• ROPS 2-post foldable ROPS standard with seat belt and latch.
• PTO Engagement Integrated wet clutch system in transmission, connected to right angle gearbox on deck via drive shaft
• Drive Wheel Release Allows unit movement without engine running.
• Engine Spec ZMTR1

Decks

• Width / Cutting Deck 72"
• Deck Style Floating Deck
• Deck Style Description Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
• Deck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge reinforced spindle mounting locations for improved strength and reduced weight.
• Blade Tip Speed Approximately 18,500 fpm
• Cutting Heights 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
• Blades 3 Blades at 24.50" Length

Dimensions

• Width 84.9 in. (215.6 cm)
• Length 99.6 in. (253.0 cm)
• Height 71.8 in. (182.4 cm)
• Curb Weight 1930

Lazer Z Diesel Accessories

Hitch Kit

Hitch kit (NLZD)

Flasher Light Kit

LIGHT KIT

LED Light Kit (not compatible with 135-2473)

LIGHT KIT

Micro-Mulch System

The aerodynamically designed deck, baffles and special mulching blades create airflow patterns that circulate leaves and grass for repeated cuttings and even dispersal deep into the turf. The simple bolt-in mulching baffles create independent mulching chambers which reduces the transfer of material from one mulching blade to another thereby improving the distribution of mulched clippings or leaves.

Operator Controlled Discharge (foot)

Operator Controlled Discharge (Foot)

Jack

Easy to use, 15" stroke Bulldog jack, gives you plenty of room to change blades or perform routine deck cleaning (jack mount receiver not included).

Trash Container (Not compatible with 135-7076)

Trash container (NLZD)

Slow Moving Vehicle Sign Kit

Slow moving sign kit (NLZD)

Sun Shade (ROPS)

Easily mounts to Rollover Protection System (ROPS). Made of heavy-duty, water- repellent canvas for maximum durability. Easily removable for transport. Fits all Lazer Z and Pioneer models. (Does not fit Quest.) (Replaces 116-0513)

Rear Guard and Bumper Kit

Protect your engine and enhance the appearance of your machine with this rear guard and bumper kit.

Jack Mount Receiver

RECEIVER-JACK MOUNT - Lazer Diesel

Turf Striping Kit

Fits 72" models. Customize your property with consistent and professional striping using a smooth operating roller design. Installs quickly, using existing mounting points, and easily adjusts for varying cutting height settings. Does not affect your ability to get up and over curbs.

UltraVac Completing Kit

UltraVac Completing Kit, 724-80T (NLZD)

UltraVac Collection System

UltraVac 3-Bagger Collection System (NLZD)