With the Lazer Z EFI S-Series, you can choose from eight different engines, including an eco-friendly, Electronic Fuel Injection (EFI), propane option. Four UltraCut™ Series 4 cutting deck sizes are available with widths up to 72 inches. Want tough, try a 10-guage, formed and continuously seam-welded top and a 7-guage side skits. All with welded spindle mounting sites and full-floating 4-point suspension with four adjustable anti-scalp rollers.
No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.
24 x 12-12, 4 ply Turf Master®
Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
Front Caster Tires
13 x 6.5-6, smooth-tread, semi-pneumatic.
Lever-actuated disc brake.
Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
12-volt battery with 30-amp alternator.
Electronic Fuel Injected
Heavy-duty canister air filtration system
12-gallon (45.4-L), single fuel tank with single fill location.
Yes - electronic Sender
Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14. 5 cubic inch motors.
Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position.
Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
2-post foldable ROPS standard with seat belt and latch.
MagStop electromagnetic 250-ft-lb clutch with spot brake
Drive Wheel Release
Allows unit movement without engine running.
.50" thick caster yoke arms.
Lazer Z S-Series 29.5 HP* Kaw EFI EGov EKA850 w/60" UltraCut Series 4 Deck, RED, Susp Seat & Wide Semi-Pneum
*The gross horsepower of these gasoline engines was laboratory rated at 3600 rpm by the engine manufacturer in accordance
with SAE J1940 or SAE J2723. As configured to meet safety, emission and operating requirements, the actual engine
horsepower on these mowers may be significantly lower.
**The gross horsepower of the 3TNV80FT was laboratory rated at 2600 rpm; the 3TNV88C was laboratory rated at 3000 rpm by
the engine manufacturer in accordance with SAE J1995. As configured to meet safety, emission and operating requirements, the
actual engine horsepower on these mowers may be significantly lower.
Width / Cutting Deck
Deck Style Description
Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
Blade Tip Speed
Approximately 18,500 fpm.
1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
3 Blades at 20.50" Length
72.8 in. (184.9 cm)
83.1 in. (211.1 cm)
70 in. (177.8 cm)
No Downtime Policy
Has your mower ever broken down in the middle of May when the grass is growing an inch an hour and the repair shops have a two week wait? You never have to go thru that again! Because when you buy a mower at American Pride with a pre-tax value of greater than $4000, we will give you one to use while yours is getting fixed. Just bring us your mower (pick-up available) and if we cannot fix it within an hour – we will load you up with a loaner!